| Quantity: 100,000,000-800,000,000 Gal/Month |
|
|
| STANDARD SPECIFICATIONS OF RUSSIAN VIRGIN FUEL OIL D6 |
|
|
| M e t hod Units |
T e s t |
Result |
U n it |
| ASTM D5002 |
Density and Relative Density of |
29.7 (29.7) (Min) |
API |
|
Crude Oils |
|
|
|
Average API Gravity |
|
|
| ASTM D1298-99 |
Density @15 Deg C |
0.87 (0.8775) (Max) |
Kg/t |
| ASTM D97 |
Pour Point of Petroleum Products |
< -33 (-36) (BELOW ZERO) |
°C |
|
Pour Point |
< -27.4 (-32.8) (BELOW ZERO) |
°F |
|
Pour Point |
|
|
| ASTM D93-IP34 |
Pensky-Martens Closed Cup Flash |
117 (137) (MIN) |
°F |
|
Point |
|
|
|
Corrected Flash Point |
|
|
| ASTM D4294 |
Sulfur Content in Petroleum |
0.38 (0.358) (MAX) |
Wt% |
|
Products by EDXRF |
|
|
|
Sulfur Content |
|
|
| ASTM D445 |
Kinematic/Dynamic Viscosity |
17.83 (18.12) (MAX) |
Mm2/s |
|
Kinematic Viscosity @ 122°F / 50°C |
|
|
| ASTM D6304 |
Water Content by Coulometric |
0.20 (0.7) (MAX) |
Wt% |
|
Karl Fisher Titration |
|
|
|
Water Content |
|
|
| ASTM D482 |
Ash from Petroleum Products |
0.279 (1.007) (MAX) |
Wt% |
|
Average Ash |
|
|
| ASTM D2161 |
Conversion of Kinematic Viscosity To SUS/SFS 1Saybolt furoi viscosity 122°F |
10.9SFS |
(MAX) |
| ASTM D5184 |
Aluminum and Silicon in Fuel Oils by ICP-AES or AAS |
102 (MAX) |
Mg/kg |
|
Aluminum Content |
93 (MAX) |
Mg/kg |
|
Silicon Content |
|
|
| ASTM D95 |
Water by Distillation, Vol% |
0.70 (MAX) |
Vol% |
| ASTM D4530.06 |
Carbon Residue |
1.11 (MAX) |
Wt% |
|
|
|
|
| M e t hod T e s t Re s ult Units |
|
|
|
| IP 143 Asphlteness Heptane lnsolubles |
|
|
|
|
Asphaltene Content |
0.08 |
Wt% |
| IP 501 Determination of AL,Si,V,Ni,Fe,Na,Ca,Zn,P in Fuel Oil-ICPES |
|
|
|
|
Aluminium Silicon Sodium Vanadium Calcium Zinc |
372 |
mg/kg |
|
Phosphorus |
187 |
mg/kg |
|
Iron |
117 |
mg/kg |
|
|
1 |
mg/kg |
|
|
779 |
mg/kg |
|
|
298 |
mg/kg |
|
|
4176 |
|
|
|
545 |
|
